F41 Nut SAE J512 #010110 SAE 45° flare Fittings Adapter Connector 20910 41FS 1110 N1 41FX 441S L
SAE #01010
| PARS# | TUBE O. D* | C | D | L |
| F41-02 | 1/8 | 3/8 | .133 | .50 |
| F41-03 | 3/16 | 7/16 | .195 | .62 |
| F41-04 | 1/4 | 9/16 | .258 | .75 |
| F41L-04 | 1/4 | 1/2 | .258 | .75 |
| F41-05 | 5/16 | 5/8 | .320 | .88 |
| F41-06 | 3/8 | 3/4 | .383 | 1.00 |
| F41L-06 | 3/8 | 3/4 | .383 | .88 |
| F41-07 | 7/16 | 13/16 | .445 | 1.06 |
| F41-08 | 1/2 | 7/8 | .508 | 1.12 |
| F41L-08 | 1/2 | 7/8 | .508 | .93 |
| F41-10 | 5/8 | 1-1/16 | .633 | 1.31 |
| F41-12 | 3/4 | 1-1/4 | .758 | 1.50 |
| Part# | Post SizeUNF | Thread | A | Hex | Approx.Wt.Lbs. |
| 10-013 | 1/8″ | 5/16-24 | 0.5 | 0.37 | 0.01 |
| 10-014 | 3/16″ | 2003/8/24 | 0.62 | 0.43 | 0.02 |
| 10-015 | 1/4″ | 7/16-20 | 0.75 | 0.56 | 0.03 |
| 10-015L | 1/4″ | 7/16-20 | 0.75 | 0.5 | 0.03 |
| 10-016 | 5/16″ | 2001/2/20 | 0.88 | 0.62 | 0.04 |
| 10-017L | 3/8″ | 2005/8/18 | 0.88 | 0.75 | 0.05 |
| 10-017 | 3/8″ | 2005/8/18 | 1 | 0.75 | 0.04 |
| 10-018 | 7/16″ | 11/16-16 | 1.06 | 0.81 | 0.06 |
| 10-019L | 1/2″ | 2003/4/16 | 0.93 | 0.87 | 0.06 |
| 10-019 | 1/2″ | 2003/4/16 | 1.12 | 0.87 | 0.09 |
| 10-020L | 5/8″ | 2007/8/14 | 1.08 | 1 | 0.1 |
| 10-020 | 5/8″ | 2007/8/14 | 1.31 | 1.06 | 0.15 |
| 10-021 | 3/4″ | 1-1/16-14 | 1.5 | 1.25 | 0.24 |
| 10-022 | 7/8″ | 1-1/4-12 | 1.62 | 1.5 | 0.36 |
| 10-026 | 1″ | 1-3/8-12 | 1.81 | 1.62 | 0.44 |
Interchangeability ut referat
Parker : 41FS-2 41FS-3 41FS-4 41FS8 41FX-6 41FS-7 41FS-8 41FX-8 41FS-10 41FX-10 41FS-12 41FS-14
Eton : 1110×2 1110×3 110×4 1110×5 1110×6 1110×7·1110×8 1110×10 1110×12*
Mediterraneus : 10-013 10-014 10-015 10-015L 10-016 10-01 10-017 10-018 10-019L 10-019
attention please Quotations et traditione non-stirpe items suppleverunt petitionem.Configurationes et dimen- siones mutabiles sine nota.Additae informationes inveniuntur in SAE J530 Pipe Automotive Fittings et SAE J531 Exhaurire Plugs.
Actualis OD Flare Fittings
SAE 45° Flare Fittings & Adaptors
Industry Standard - SAE J512 45° Flare
Specification
- Temperature dolor: -65°F ad +250°F (-53°C ad +121°C) maximis pressionibus operandis.
- Pressura operans: usque ad 2000 psi pendentes in magnitudine tubi.Resistent pressioni vexillum Tubingae - usque ad 5000 psi cum bundy-globo (duplex accensa) et 3500 psi aeris Tubingae, pro magnitudine pendens.Uti patet, Temperature et species Tubingae magni momenti sunt.
Institutiones
- Tubing ad cut longitudo desideravit.Fac ut silua omnia sublata sint et extrema quadrata incisa sint.
- Slide nut in tubum.Fila et "A" nucis e debent occurrere.
- Flare finem tubi cum 45° ferramento urente.a-Meare exardescere diametrum b-Examine excandescunt nimiae tenues e.
- Stamina lubricat, et corpus convenit aptans.Nux versa manus.
- Coetus obstringere cum clavis, donec solidus sensus offendit.Inde sextam partem appone.
SAE 45 Degree Flare Fittings – Brass Material
Applications
LP, gas naturale, liquores flammabiles, instrumentatio, refrigeratio, potentia gubernationis, systemata hydraulica et pneumatica.Usus est humilis, mediae et altae lineae pressionis sub gravissimis condicionibus adversae, compatibile cum cupro, aere, alumine et ferro hydrau- Tubing quae exarsere possunt.
Features
- Constructio – Corpus et nucis duae partes, recta barstock & caerimonias composuerunt.
- Resistentia Vibratio bona – utere longa nuce cum maior tremor resistentia requiritur.
- Conformantia - Officia gravia excandescunt aptationes SAE specificationibus, Meets specificationibus et signis ASA, ASME, SAE et MS (signa militaria).
- Reusability - Congregari potest & re-congregari identidem & resistit mechanica viverra-e.
Cuprum, aes, aluminium, ac ferrum hydrau- Tubing quod excandescere potest.
tolerantia
+/- .03 in omnibus dimensionibus.Dimensio data sine notitiam mutare potest.Quaeso nos, cum dimensiones criticae sunt.
